CITY MODEL 1 • VERSION 1
APPENDIX D
Fastener Torque Specifications
Correct tightening torque of threaded fasteners is very important to your safety.
Always tighten fasteners to the correct torque. In case of a conflict between the instructions in
this manual and information provided by a component manufacturer, consult with your dealer
or the manufacturer’s customer service representative for clarification. Bolts that are too tight
can stretch and deform. Bolts that are too loose can move and fatigue. Either mistake can lead
to a sudden failure of the bolt.
Always use a correctly calibrated torque wrench to tighten critical fasteners on your Ebike.
Carefully follow the torque wrench manufacturer’s instructions on the correct way to set and
use the torque wrench for accurate results.
FASTENER RECOMMENDED TORQUE
The below spec if for DENAGO eBike specifically
Model
CITY 1.0
issued 02/01/2022
All figures in the table below are available in Newton Meters (NM), Inch-Pound (IN-LB)
and Foot-Pounds (FT-LBS). Note that some companies do not specify torque for certain components
or parts thus we offer a range.
Contact the manufacturer for the most up to date specifications.
Headset - Handlebar SPEC
Component
Torque Spec
Newton Meters (NM)
Torque Spec
Inch-Pound (IN-LB)
Torque Spec
Foot-Pounds (FT-LBS)
Stem - Binder Bolt(s) to steer tube
(Threadless)
6.215
55
4.58
Stem - Binder Bolt(s) to Handlebar
10
88.5
7.375
Stem - Binder Bolt(s) Threadless
Compression Bolt
3.955
35
2.92
Stem - Binder Bolt(s) to Internal Steer
Tube/Fork (QUILL STYLE)
19.66-29.38
174-260
14.5-21.66
Grips with Locking Mechanism
-
-
0
Shift Lever to Handlebar (Clamp)
5.98-7.91
53-70
4.42-5.83
Brake lever - MTB type
5.98-7.91
53-70
4.42-5.83
Bell to Handlebar (clamp)
1.92
17
1.416666667
Monitor to Handlebar (clamp)
1.02
9
0.75
Throttle to Handlebar (clamp)
1.92
17
1.416666667
