MERMAID E1100-I
STD00
Page 44 of 54
1. Operation & use of rotating nozzle Type 1
Prepare for blasting
1)
Hold the trigger gun with 2 hands, 1 on the trigger and the other on the handle.
2)
With the lance assembly pointing down
3)
Slowly press on the trigger to bring up pressure with the lance assembly pointing in
the downward direction.
4)
Check that no over pressure and no leaking on the fittings.
5)
Release the trigger and make any holding position adjustment.
6)
Start blasting by follow the procedure from 2~4.
Note: Do not point the lance at any person at any time.
Ensure the rotating nozzle is pointing down before starting to
blast. This will increase the life-span of the rotating nozzle.
WARNING
Summary of Contents for MERMAID E1100-I
Page 38: ...4 Spare parts list MERMAID E1100 I STD00 Page 37 of 54 Pump assembly ...
Page 46: ...4 Spare parts list MERMAID E1100 I STD00 Page 45 of 54 ...
Page 47: ...4 Spare parts list MERMAID E1100 I STD00 Page 46 of 54 ...
Page 53: ...5 Wiring Diagram MERMAID E1100 I STD00 Page 52 of 54 5 Wiring Diagram ...
