Demix TEKHMANN TSC-1885, Manual

Page: 25 / 43

25
The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the winding
does not become damaged and/or wet with oil or water.
4. Inspecting the carbon brushes.
The motor is equipped with carbon brushes, which wear with time. When a brush reaches the wear
limit, the motor may malfunction. If the engine is equipped with a disengaging brush, it will
automatically turn off. In this case replace both carbon brushes. Keep the brushes clean and ensure
that brushes move freely within the brush holders.
CAUTION!
When using the power tool follow these rules:
• continuous use of the tool should not exceed 15 minutes;
• do not allow mechanic damage (strikes, falls etc.);
• protect the drill from external sources of heat and chemically active substances, as well as liquid and
objects penetration;
• provide effective cooling and drilling wastes withdrawal from the tool working zone;
• before disconnecting the tool from the power source turn off the On/Off switch;
• check the engine temperature, do not allow overheating.
Inobservance of these rules will make warranty void!
WARNING!
Repair, modification and check of TEKHMANN power tools should be performed only in
authorized service centers TEKHMANN. While use or maintenance of power tools follow all
safety rules and standards.
NOTE:
TEKHMANN TM power tools are constantly being improved and modified to incorporate the
latest technological advancements. Accordingly, some parts may be changed without prior
notice.
Head office:
Demix LLC,
1A, Mossakovsky str.,
Dnipro, Ukraine, 49044,
tel./fax: +38 056 375-43-16
tekhmann.com