DEMAG DRF 200, Assembly Instructions Manual

Page: 17 / 52

3.5 Transport, packing and storage
Safety instructions
WARNING
Falling parts
Risk of injury from falling parts during transport, loading and unloading operations.
–
Do not step under the suspended load. Keep a sufficient safety distance.
– Cordon off a large area around the working zone.
WARNING
Damage caused during transport
The DRF 200 friction wheel travel drive may be damaged or destroyed by inappropriate transport.
Attach lifting and handling equipment only at the correspondingly marked points.
Scope of delivery
If special designs or additional options are ordered or the latest technical modifications are incorporated, the ac‐
tual scope of supply may differ from the data and information as well as from the illustrations described here. If
you have any questions, please contact the manufacturer.
Transport inspection
● Check the delivery immediately on receipt to ensure that it is complete and examine it for any damage caused
in transit.
● If any transport damage is visible from the outside, do not accept the delivery or only on condition. Note the
scope of damage in the shipping documents/delivery note of the forwarding company. Lodge a claim.
● Lodge a claim for any defects as soon as they are detected, since claims for damages may only be asserted
within the relevant claim notification periods.
Packing
DRF 200 friction wheel travel drives, the accessories and the trolleys are shipped in cardboard packing.
If no agreement has been made on the return of the packing material, separate the materials according to type
and size and make them available for further use or recycling.
Environmental protection:
● Always dispose of packing materials in an environmentally compatible way and according to locally applicable
disposal regulations.
● If required, utilise the services of a recycling company.
Storage
Until they are installed, the equipment and accessories must be kept closed and may only be stored under the
following conditions:
● Do not store outdoors.
● Store in dry and dust-free places, relative air humidity: max. 60%.
● Do not expose to aggressive media.
● Protect against direct sunlight.
● Avoid mechanical vibrations.
● Storage temperature: -25 to +70 °C.
● Avoid strong temperature fluctuations (condensation).
● Oil all bare machine parts (rust protection).
● Check the general condition of all parts of the packing at regular intervals. If required, refresh or renew rust
protection.
● If stored in a damp location, the equipment must be packed tight and protected against corrosion (use desic‐
cant).
214
39
5 44/120
914
17