Deltafox DG-PLM 5125 SP, Translation Of The Original Instructions For Use

Page: 118 / 188

GB
118
Maintenance intervals
Regularly carry out the maintenance work listed in the “maintenance intervals” table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting
performance and avoids accidents.
Table maintenance intervals
Maintenance Work
(See “cleaning and mainte-
nance“)
Before After
After
1
st
5
Hrs.
After
8 Hrs.
After
50 Hrs. Annual
Work
Check and tighten screws,
nuts and bolts

Check the engine oil level /
petrol level and refill with en -
gine oil / petrol if required
 
Clean operating elements /
the area around the silencer
 
Clean the finger protection

Change the engine oil
  
Replace the air filter
a

Clean/adjust the spark plug
Replace the spark plug


Check the silencer and spark
catcher
b
 
Clean the air cooling system
a,

a
Clean more often if there is a high level of dust or heavy dirt
Replacement parts/accessories
Spare parts and accessories can be obtained at
www.grizzlytools-service.eu
If you have any other questions, contact the ”Service-Center” (see „Service-Center“).