Deltafox DG-PLM 5125 SP, Translation Of The Original Instructions For Use

Page: 115 / 188

GB
115
Adjusting the bowden cable
If the Bowden cable becomes misplaced
for the drive and has too much play, it can
be adjusted.
1. Loosen the small lock nut (36).
2. - Turn the adjusting nut (37)
anticlockwise:
The Bowden cable shortens.
- Turn the adjusting nut (37)
clockwise:
The Bowden cable lengthens.
3. Tighten the locking nut (36) by
hand.
Checking the blade
Always have a blade that is dama-
ged or unbalanced replaced by a
specialist workshop.
Improper installation can cause
severe injury.
Never tilt the lawnmower to the
side or forwards when the petrol
or oil tank is filled!This could
damage the engi-ne, voiding the
warranty.
Always have a specialist workshop
sharpen a dull blade, as they can
perform imbalance testing.
Wear gloves when handling the
blade.
• Remove the spark plug connector
( 15) and check the blade for wear
and damage.
Adjusting the carburettor
The carburettor has been preset in the
factory for optimum performance. If re-
adjustments are required (see “Trouble-
shooting”) have the adjustments made by
a specialist workshop.
Storage
General storage instructions
Do not store the equipment with
a full collection box. In hot wea-
ther, the grass begins to ferment
when heat is generated.
Risk of fire.
• Clean and service the equipment be-
fore storage.
• Allow the engine to cool before storing
the equipment in enclosed areas.
• Use suitable and authorised contain-
ers for storing fuel.
• Keep the equipment in a dry place
that is protected from dust and out of
reach of children.
• For space-saving storage, the han-
dle bar can be folded down (see 1-4
„Cleaning and General Maintenance
Work - Cleaning and maintenance
work on the underside of the appli-
ance", )
Storage during longer breaks
from operation
Non-observance of the storage
instructions may cause starting
problems or permanent damage
as a result of fuel residues in the
carburettor.