Technical Information Leaflet
TIL: 035
LM315GC
Height of Cut Adjustment
Page 1: ...Technical Information Leaflet TIL 035 LM315GC Height of Cut Adjustment...
Page 2: ...mer is fitted then this screw is not used Height of Cut Setting Screw This end of this screw as shown needs to be adjusted so that it measures the same distance as the desired groomer setting This scr...
Page 3: ...at this on both sides of the machine With the Baroness setting bar set to the required height of cut place it into position on the cutting unit so that the ends of the setting bar are resting on both...
Page 4: ...ly not too tight and not too loose over the upper surface of the bedknife with the ends of the setting bar touching both the front and rear rollers Adjust both sides of the front roller until both sid...
