21
B.
Network Management
Click the [Network Status] button on the UNOcentral tab to open the network
management window, as shown in Figure 8. In this window, you can view the MAC Address and
IP status of the three physical network interfaces of UNOcentral. If the network interface is
currently plugged in and connected, it will display the IP (such as 192.168.1.168), otherwise it
will display Disconnected. Note: The three ports, LAN1, LAN2, and LAN3, on the
UNOcentral device correspond to the Figure 8 marks enp2s0, enp3s0, enp4s0. It is
recommend that the network cable be plugged into LAN1.
Figure 8
Network status window
Click [Set] in the network settings window to open the network settings window, as shown
in Figure 8. In that window, you can set 3 groups of MAC interface parameters. Parameters that
can be set are:
DHCP: Whether to enable the DHCP client; the IP is allocated by the upper router. If
enabled, no other settings are required.
IP/Subnet Mask: IP is entered manually, e.g. 192.168.1.168; subnet mask is chosen by
dropdown list, e.g. 255.255.255.0/24.
