23
2.1.1.2
UNOnext settings
As shown in Figure 10, there are 2 main functions on the UNOnext settings tab: Central
Lock switch and UNOnext data settings and enabling.
Figure 10 UNOnext settings tab
The Central Lock is used to determine whether the UNOnext connected to UNOcentral
allows the physical button to operate with the UNOnext App. If the Central Lock is OFF, it is
allowed; if the central control lock is ON, it is not allowed.
Concerning UNOnext data and enabling: here is the data of up to 16 UNOnext units,
including Modbus ID, Alias, and Enabled. As shown in Table 12.
Table 12
Description of the UNOnext settings tab
Data
Description
ID
Modbus ID of UNOnext. From 208 (0xD0) to 223 (0xDF). See the UNOnext installation
manual for the setting method.
Alias
The alias of UNOnext can be set and will be displayed on Globalview and Signage.
Enabled After a UNOnext is enabled, it will be displayed on Globalview.
After setting all UNOnext devices, click [Update] for the setting to take effect. When
UNOnext is enabled, the UNOnext data bar will be displayed on Globalview, and then the
