10
X. Wiring diagram
–
Installing the external temperature sensor cable (optional)
The product
’
s built
-
in temperature sensor module has an accuracy of +/
-
1°C. If you need more precise temperature
sensing, the product can be equipped with temperature sensor cable accessories, allowing for accuracy of about +/
-
0.3°C,
which can meet more precise environment temperature control requirements. After installation, the default temperature
display on the screen will be replaced with the temperature detected by the external temperature sensor cable
XI. Installation instructions
I. Notice
1.
The air quality sensor is recommended to be installed at a height of 80
-
150 cm.
2.
The sensor must be installed in a location with air circulation.
3.
In order to ensure the sensor's accuracy, avoid installing the sensor near sunlight and heat sources.
4.
UNOnext has a variety of precision sensors inside. Please do not violently strike or cause it to vibrate during
installation, as that may cause the sensor readings to drift, and will it take longer to enter a stable and balanced
state.
II. Installation method
1.
Install the wall mount accessory for UNOnext. Use the wall plugs included in the box to install it on the wall, or
install in a power box. The wall mount has screw hole spacing (60mm and 84mm) suitable for power boxes in
multiple countries, but the power box must be installed horizontally as shown in Figure 1.
2.
This controller uses a 9
-
24V DC power supply. AC power must be converted to the required power source before
installation, or use the power supply provided along with this controller. Verify electrical characteristics in
“
IV.
Technical parameters
”
for details
3.
Verify that the power supply and data lines are laid out according to specifications before installation
4.
As shown in Figure 2, install UNOnext on the wall mount and verify that all four buckles are installed and fixed.
5.
As shown in Figure 3, use a hexagonal screwdriver to fasten the M4 hex socket screws to complete the installation
III. Power-on verification
1.
If the device has been installed, the power indicator will light up after the power is connected, and the air quality
indicator will turn blue, which means the device is being turned on at this time. If green or yellow appear, it
means that the device has completed booting and the current air quality status has been displayed. If the power
indicator does not light up, please verify that the power cord is properly connected and there is power supply.
2.
UNO
-
C07X011 has Bluetooth and Wi
-
Fi functionality. Users can go to the iPhone app store or Android play store
to download the UNOnext APP. After opening the APP, the serial number of the device and sensor values will be
displayed. You can refresh to see if the device is already online.
Controller
