background image

12

 

Federal Communication Commission Interference Statement

 

 

 

 
 
 

FCC ID: H79­UNOC07X011 

Contains FCC ID: SH6MDBT50Q

 

 

Caution:

 

Any Changes or modifications not expressly approved by the party responsible for compliance could void 

 

the user’s authority to operate the equipment. 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

 

(1)This device may not cause harmful interference, and (2) this device must accept any interference 

 

re­ceived, including interference that may cause undesired operation. 
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, 

 

pur­suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in a 

 

particular installation. If this equipment does cause harmful interference to radio or television reception, 

 

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 

 

interference by one or more of the following measures: 
—Reorient or relocate the receiving antenna. 
—Increase the separation between the equipment and receiver. 
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

 

—Consult the dealer or an experienced radio/TV technician for help. 
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. 

 

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator 

 

and a human body.

 

 

 

Canada: Industry Canada (IC) Statement.

 

IC: 

26414

-

UNOC07X011

 

 

Warning:

 

This device complies with Industry Canada licence

-

exempt RSS standard(s). Operation is subject

 

to the following two conditions:

 

(1) this device may not cause interference, and

 

(2) this device must accept any interference, including interference that may cause undesired operation of 
the device.

 

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. Thi
s equipment should be installed and operated with a minimum distance of 20 cm between the radiator and 
a human body.

 

Le présent appareil est conforme aux CNR d

Industrie Canada applicables aux appareils radio exempts de 

licence. L

exploitation est autorisée aux deux conditions suivantes :

 

(1) l

appareil nedoit pas produire de brouillage, et

 

(2) l

utilisateur de l

appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 

susceptible d

en compromettre le fonctionnement.

 

Cet équipement est conforme aux limites d'exposition aux rayonnements d'ISDE établies pour un environn
ement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le r
adiateur et un corps humain.

 

Summary of Contents for UNO-C07X011















Reviews: