Delta SVG300A43A-11, Quick Star

Page: 59 / 127

I
Before You Start
Please carefully read and be aware of the relevant safety information before operating this product for
your and the product's safety.
D AN GER
; Please make sure that the power is off before configuring wires or installing the
Static VAR Generator (SVG).
; Wait at least 10 minutes after turning off the AC power, as high voltage still exists
inside the Static VAR Generator (SVG) and is extremely dangerous. Please make
sure that the DC voltage drops to 0V before configuring wires or installation.
; The IC components on the Static VAR Generator's internal circuit board are
susceptible to damage from electrostatic discharge. Please do not touch the circuit
board with bare hands. Unauthorized alteration of components or circuits within the
Static VAR Generator (SVG) should be avoided.
; The Static VAR Generator (SVG) and its components should not be installed near
heat sources and flammable objects.
; If working under humid or live wire conditions is unavoidable, please stand on dry
rubber mats or wooden boards and wear insulated gloves.
CAU TION
; All models come packaged with a User Manual and 2 keys. Please keep them safe
as we are unable to provide replacements if the keys are lost or stolen. If you need
help unlocking the device, please ask for assistance at a local dealer, or contact
Delta's Industrial Automation Business Unit.
; Read and follow all instructions in this User Manual before installing, operating, or
servicing the product. Please keep the User Manual, do not discard as it will be
needed for further use.
; Before installation or maintenance, wear appropriate safety clothing, follow safety
operating procedures, and use proper testing equipment as electric spark may
damage the eyes, burn skin, damage equipment, or ignite combustibles.
; Only specialists from the manufacturer or authorized dealers may perform
maintenance on the Static VAR Generator (SVG). Installation, wiring, and
maintenance of the Static VAR Generator (SVG) may only be performed after the
content of this manual is clearly understood.
; Have certified electrical professionals confirm that the Static VAR Generator (SVG)
has been properly grounded to prevent injuries caused by leakage current.
; Even if the Static VAR Generator (SVG) is currently inactive, the main circuit
terminals of the Static VAR Generator (SVG) can still carry dangerous voltage.
; If unpacked and used for over 3 months, the ambient temperature of the storage
environment must not exceed 30°C as the capabilities of the electrolytic capacitors
deteriorate easily when stored at a high ambient temperature without power. Please