Delta SVG300A43A-11, Quick Star

Page: 114 / 127

10
4-3 Detailed Descriptions of Function Settings
4-3-1 Quick start
F unc tion s ettings
Q uick st art Main volt age
set t ing
Loop set t ing
CT set t ing
O perat ion mode
set t ing
Manual/ Aut o
set t ing
Before using quick start, the screen will prompt for password entry, the
default password is: "20120123".Password has to be entered
correctly, before various function settings can be accessed.
1) Main Voltage Settings: Please enter the main voltage and
frequency, based on the actual input power, if unsure, check with
your local dealer.
2) Loop Settings:
Customers can choose to set an open loop or close loop.
Currently, only the open loop option is available.
3) CT Settings:
CT Ratio: Please follow the specifications of the CT.
CT Direction: Positive (P1-P2), Negative (P2-P1).
When installing 3 CTs, their directions must be the same, if any
one is installed incorrectly, please turn off the power before
changing. Changing a CT with the power still on is not
recommended as it will cause damage to the CT.
Total Power Capacity: Enter the total power capacity of the CTs
connected in parallel; at most 6 can be connected in parallel.