39
EN
Installation
5.
Installation
5.1
Installing Location
The SOLIVIA TL inverters can be installed indoors and in protected outdoor areas due to its enclo-
sure protection classes IP65 and IP55. See the figure 5.1 for further explanation of the protection
classes.
WarnInG
Death and serious injury may occur if the following instructions are
not carefully followed
► Do not install the unit near/on flammable objects.
► Do not install the unit at a location that people can gain entry/touch
easily.
► Mount the unit tightly onto a solid/ smooth wall.
► In order to ensure the safety of installers, there should be at least two
people to handle the installation.
► When moving the SOLIVIA TL, installer should not stand under material
handling machines.
► Dusty conditions can impair the unit’s performance
WarnInG
► According to the Australian/New Zealand standard AS/NZS 5033:2005,
PV arrays for installation on domestic dwellings should not have a maxi-
mum voltage greater than 600 V. For non-domestic installations where
the PV array maximum voltage exceeds 600 V, the entire PV array and
associated wiring and protection, should have restricted access, only
accessible to authorized personnel.
CaUTIOn
Machine and equipment damage may occur.
► Do not install the unit at a location that has direct exposure to sunlight.
