Copyright © 2016 DELTA Electronics, Inc. All rights reserved.
Page
94
NovoPRO User Manual 2.X
Fill in the values of some settings:
1.
When opened, the text will look like this:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<NovoPRO>
<edition>
CORP or EDU
</edition>
<wifi-ssid>
example_wifi
</wifi-ssid>
<wifi-password>
example_wifi_password
</wifi-password>
<remote-manager-ip-address>
0.0.0.0
</remote-manager-ip-address>
<remote-manager-port-number>
20142
</remote-manager-port-number>
</NovoPRO>
</configuration>
2.
Change appropriate setting value according to your setup environment, and delete the ones
you don’t need. The following table describes each setting in details.
Key
Value (example)
Explanation
edition*
CORP or EDU
Edition value. It has to be either CORP or EDU. Refer
to Section 1.4 for more details about these two
editions.
wifi-ssid
(example_wifi)
Wifi network SSID name
wifi-password
(example_wifi_password)
Wifi network password
remote-manager-ip-address*
(0.0.0.0)
IP address of Remote Manager software
remote-manager-port-number*
20142
The port number used by Remote Manager software
to listen to device reporting. 20142 is the default
number. You need change it to match your Remote
Manager’s setting.
Note: Settings marked with “*” are supported in NovoPRO software release V2.2 and above.
