MVBX2-X User’s Manual
34
LPT & COM
When set to LPT/COM, any event occurring at a COM(serial)/LPT (printer) port will awaken
a system which has been powered down.
HDD & FDD
When set to On, any event occurring at a hard or floppy drive port will awaken a system
which has been powered down.
DMA/master
When set to ON, any event occurring at a hard or floppy drive port will awaken a system
which has been powered down.
Modem Ring Resume
If a modem is connected to the system, this feature allows an incoming call to power up the
system in soft-off mode.
Wake Up on LAN
This allows the selection of either Enabled or Disabled setting to power up the computer
(make sure system power is on) when the LAN Card receives a call while the computer is
off.
RTC Alarm Resume
This motherboard an alarm on the system real-time clock that can resume the system
from a software powerdown or a power-saving mode. Use this item to enable or disable this
feature.
Primary INTR
When set to ON, any event occurring at will awaken a system which has been powered
down.
IRQ3 ~ IRQ15
The IRQ3 ~ IRQ15 is a list of IRQ’s (Interrupt Requests), which can be exempted much as
the COMS ports and LPT port above can. When an I/O device wants to gain the attention of
the operation system, it signals this by causing an IRQ to occur. When the operating system
is ready to respond to the request, it interrupts itself and performs the service.
