6. BIOS Configuration
MVBX2-X User’s Manual
41
Supervisor Password and User Password
These two options set the system passwords. “
Supervisor Password
” sets a password
that will be used to protect the system and the Setup utility while “
User Password
” sets a
password that will be used exclusively on the system. By default, the system comes without
any passwords. To specify a password, highlight the type you want and then press <Enter>.
A password prompt appears on the screen, take note that the password is case sensitive,
and can reach up to 8 alphanumeric characters long, type in your password and then
press <Enter>. The system confirms your password by asking you to type it again. After
setting a password, the screen automatically reverts to the main screen.
To implement password protection, specify into the “Security Option” field of the BIOS
Features Setup screen once the system prompt for password. If you want to disable
either password, press <Enter> instead of entering a new password when the “Enter
Password” prompt appears. A message confirms the password has been disabled.
