5. Hardware Installation
MVBX2-X User’s Manual
11
z
CPU FSB Header “JP1,JP4”
It’s two 3-Pin header that set a FSB for the CPU. This allows the selection of
the CPU’s external frequency.
Note : You may set the memory speed independently from the CPU external
frequency. Depending on your memory type PC-100 (100MHz) or PC-133
(133MHz), select the appropriate SDRAM speed along with the appropriate
CPU speed.
The MVBX2-X motherboard system clock combination is listed in below table.
z
z
z
z
z
Wake On LAN Connector “J4”
z
It is a 3-Pin 2.0mm connector that used for remote wake up system through a
network.
z
If you have installed a network adapter (LAN adapter), you can use the cable
provided with the card to plug into the J4 connector on the motherboard.
This is the Wake On LAN feature, when your system is in a power-saving
mode, any traffic through the network automatically resume the system.
You must enable this item using the Power Management item of the BIOS
setup. See BIOS Configuration for more information.
3
1
Jumper Setting
JP1
JP4
66MHz
Short Pin 2-3
Short Pin 2-3
100MHz
Short Pin 2-3
Short Pin 1-2
133MHz
Short Pin 1-2
Short Pin 1-2
FSB
CPU Clock SDRAM Clock AGP Clock PCI Clock CPU/PCI Ration
66MHz
66/100MHz
66MHz
33MHz
2
100MHz
66/100/133MHz 66MHz
33MHz
3
133MHz
100/133MHz
66MHz
33MHz
4
