MVBX2-X User’s Manual
16
z
Push the latches on the processor toward the center of the processor
until they click into place (This step for Intel cartridge type processor only).
z
Lift one end of the processor until it is freed from Slot1. Lift the other end of the
processor until it is freed from the Slot1. Lift the entire processor until it is free
from the URM.
Step3:
Install the SDRAM Modules
z
The motherboard has three DIMM (Dual In-line Memory Module) sockets which
support SDRAM modules installed with 3.3V, unbuffered, PC-100 (100MHz) and
PC-133 (133MHz) SDRAM memory chips. Each memory module can support a
maximum capacity of 128MB so total maximum memory is 384MB.
z
Follow the steps mentioned below to install the SDRAM module :
z
On the motherboard, locate the three DIMM sockets.
z
Pull the locking latches of the DIMM sockets outwards.
z
Align the memory module correctly. The edge connector of the memory module
has notches that match obstructions in the DIMM socket. You must match the
notches with the obstructions in order to install the module.
z
Press the edge connector of the memory module into the DIMM socket. Press
down quite firmly so that the locking latches of the DIMM socket are levered
upwards to secure the memory module in place.
z
Repeat the process with any other memory modules that you want to install.
