M81E-X Series User’s Manual
42
Hot Key Power ON
The POWER ON Function item allows you to power on the system by pressing hot
keys or typing a password. Refer to explain in the below.
%
[Password]
: Disable the function of power button and let the system can only
be powered on through the preset keys (like a password).
%
[BUTTON ONLY]
: Disable Wake on Keyboard an Mouse function. You can
boot up your system by power button only.
%
[Keyboard 98]
: You can boot up the system by wake up button on keyboard 98.
%
[Any KEY]
: This function allows you power on the system by clicking any key.
%
[Mouse Left]
: This function allows you power on the system by double click on
mouse’s left button.
%
[Mouse Right]
: This function allows you power on the system by double click on
mouse’s right button.
%
[Hot KEY]
: This function allows you power on the system by pressing function key
<Ctrl> + <F1> through <Ctrl> + <F12> on keyboard.
The available options for POWER ON Function are : [BUTTON ONLY] [Keyboard 98]
[Password] [Hot KEY] [Mouse Left] [Mouse Right] [Any KEY].
The available options for KB Power ON Password are : [Enter].
The available options for Hot Key Power ON are : [Ctrl-F1]~[Ctrl-F12].
6.4.6 Onboard FDC Controller
This item to turn on or turn off the floppy disk controller that is built into the motherboard.
The available options for Onboard FDC Controller are : [Enabled] [Disabled].
6.4.7 Onboard Serial Port 1
Onboard Serial Port 2
These options are used to assign an I/O address and Interrupt Request Line (IRQ)
for two onboard serial ports.
The available options for Onboard Serial Port 1/2 are : [3F8/IRQ4] [2F8/IRQ3] [3E8/
IRQ4] [2E8/IRQ3] [Auto] [Disabled].
6.4.8 UART2 Mode Select
RxD, TxD Active
IR Transmission Delay
UR2 Duplex Mode
Use IR Pins
