M81E-X Series User’s Manual
22
!
In the chassis, remove the blanking plate from the opening in the chassis
adjacent to the slot you are going to use.
!
Hold the edge connector of the add-on card directly over the slot that you are
going to use. The metal bracket on one edge of the add-on card fits into the
opening from which you removed the blanking plate.
!
Carefully press the card down so that the edge connector installs into the
expansion slot. You might need to rock the card slightly to make sure that the
edge connector is seated properly into the slot.
!
Drive a screw through the metal bracket on the edge of the card to secure it in
place.
!
!
!
!
!
Follow the steps mentioned below to install the AMR interface card :
!
Please set jumper cap to the secondary position on the AMR interface card.
!
Locate the AMR slots on the motherboard.
!
In the chassis, remove the blanking plate from the opening in the chassis
adjacent to the slot you are going to use.
!
Hold the edge connector of the AMR card directly over the slot that you are
going to use. The metal bracket on one edge of the AMR card fit into the
opening from which you removed the blanking plate.
!
Carefully press the card down so that the edge connector installs into the
AMR slot. You might need to rock the card slightly to make sure that the edge
connector is seated properly into the slot.
!
Drive a screw through the metal bracket on the edge of the card to secure it in
place.
!
Refer to the AMR card’s documentation regarding any additional requirement.
