5. Function Illustrations
M81E-X Series User’s Manual
19
!
Locate the fan power connector J6 for the processor cooling fan, then connect
the cable from cooling fan to J6.
Warning : Processor require a heat sink with a cooling fan. Failure to provide
adequate cooling of the processor may seriously affect system performance
or cause permanent damage to the processor.
!
If you need to remove the processor from the motherboard, the procedure will
be as follows.
!
Disconnect the fan power cable from the motherboard.
!
Remove the sliders of the URM to “OPEN” position.
!
Push the latches on the processor toward the center of the processor until
they click into place (This step for Intel cartridge type processor only).
!
Lift one end of the processor until it is freed from Slot1. Lift the other end of
the processor until it is freed from the Slot1. Lift the entire processor until it is
free from the URM.
LOCK
SLIDER
OPEN
