HD2114P/HD2134P
- 12 -
V2.3
11)
YEAR (only HD2114P.2 and HD2134P.2)
: to set the current year. Use the arrows to
modify this parameter and confirm using ENTER.
12)
MNTH (month) (only HD2114P.2 and HD2134P.2)
: to set the current month. Use the
arrows to modify this parameter and confirm using ENTER.
13)
DAY (only HD2114P.2 and HD2134P.2)
: to set the current day. Use the arrows to modify
this parameter and confirm using ENTER.
14)
HOUR (only HD2114P.2 and HD2134P.2)
: to set the current hour. Use the arrows to
modify this parameter and confirm using ENTER.
15)
MIN (only HD2114P.2 and HD2134P.2)
: to set the current minutes. In order to correctly
synchronize the minute, it is possible to reset the seconds by pressing the UNIT key. Use the
arrows to set the current minute plus one, and as soon as that minute is reached press UNIT:
this synchronizes the time to the second. Press ENTER to go onto the next item.
16)
BAUD_RATE (only HD2114P.2 and HD2134P.2):
indicates the frequency used,
expressed in kHz, for the serial communication with the PC. Values from 1.2 (1200 baud) to
38.4 (38400baud). Use the arrows to modify this parameter and confirm using ENTER.
The
communication between instrument and PC (or serial port printer) only works if the
instrument and PC baud rates are the same
. If the USB connection is used this parameter
value is automatically set (please see the details on page 27).
LOG/DumpLOG key - only HD2114P.2 and HD2134P.2
In measurement mode, this function starts and stops the logging of a data block to be saved in the
instrument's internal memory. The data logging frequency is set in the "
Print and log interval
"
menu parameter. The data logged between a start and subsequent stop represent a block.
When the logging function is on, the LOG indication is displayed, the battery symbol blinks and a
beep is issued each time a logging occurs;
the battery symbol does not appear when using an
external power supply
.
To end the logging, press LOG.
The HD2114P.2 and HD2134P.2 can turn off during logging between one capture and the next: the
function is controlled by the
Sleep_Mode_LOG
parameter. When the logging interval is less than
one minute, the logging instrument remains on; with an interval of at least one minute, it turns off
between one capture and the next if the parameter
Sleep_Mode_LOG
=YES.
>>>
Dump LOG - only HD2114P.2 and HD2134P.2
Press the MENU key until the "
>>>_LOG_DUMP_or_ERAS
" item is displayed and then press on
the LOG key: the transfer of the data contained in the instrument internal memory via the serial port
is started.
Please see the paragraph dedicated to data transfer on page 27.
