HD2114P/HD2134P
- 22 -
V2.3
The following table reports the indications provided by the instrument as they appear on the display,
together with their description.
Display indication
Explanation
>>>_LOG_DUMP_or_ERAS
transfer or erase data
20 mBAR DIFF
probe 20mbar differential
200 mBAR DIFF
probe 200mbar differential
AVG TIME SECS
moving average in seconds
BATT TOO LOW - CHNG NOW
battery discharged - replace it immediately
BAUDRATE >>>
baud rate value
COMM STOP
printing complete
COMM STRT
printing started
coSt
or
coSt_PIT_DARC
constant of Pitot or Darcy tube
DAY_
day
DUCT MODE
flow rate calculation mode
DUMP_END
data transfer complete
DUMP_In_PROG >>>
data transfer in progress
ERR
error
FUNC CLR
max, min and average values clearing
FUNC CLRD
max, min and average values cleared
HOUR
hour
LOG In PROG
logging in progress
LOG MEM FULL
memory full
LOG_CLRD
memory data cleared
LOG_STOP
logging complete
LOG_STRT
logging started
MIN >>> USE_UNIT_TO_ZERO SEC
minutes >>> use the UNIT key to reset the seconds
MNTH
month
OVER
maximum limit of temperature or pressure exceeded
PLS_EXIT >>> FUNC RES_FOR_FACT ONLY
please exit using ESC >>> function reserved to factory
calibration
PRES BARO
barometric pressure
PRES STAT
static pressure
PRES_REL_TO_ZERO ENTR_TO_MENU
press REL to reset differential probe or ENTER to access menu
PRNT AND LOG INTV
printing and logging intervals
PRNT INTV >>>
printing interval
SECT Inch2
duct section in inch
2
SECT_m2_
duct section in m
2
SLP_MODE_LOG
turning off during recording mode
SYS ERR #
program error number #
YEAR
year
