InfraSuite - CoolDoor
6
1.1.1 Installation Instructions
•
Installation and operation should comply with local regulations. Installation
professionals must have certification in accordance with national regulations. And the
safety and health of personnel must be ensured at all times during the installation and
removal processes.
•
The unit can be connected to a single or dual power source. Make sure the input power
is disconnected before making a connection. If necessary, use a multi-meter to confirm
this.
•
Do not install the equipment on a flammable or unstable floor.
•
This unit is only intended for indoor use. The indoor environment must be separated
from the outside air so as to avoid temperature and humidity interference. Consult
national or local regulations for separating the installation environment.
•
The diameters and lengths of all electronic connection wires must follow the
requirements of the International IEC or relevant national regulations, whichever is
stricter. Meanwhile, the grounding wires of the unit must be effectively connected with
the grounding system.
1.1.2 Instructions for Use
•
The inner high voltage of the unit may be fatal! The inner components may have hidden
dangers and only qualified service personnel can operate the unit. Improper operation
may lead to serious injury or death or equipment damage. Be sure to follow all the
instructions and warnings contained in the Manual.
•
When the person leaves, make sure there are no foreign objects in the cabinet.
WARNING:
This device is powered by high voltage! May cause severe injury or death. Power
supplied to the equipment must be isolated by an electrical cutoff device. Any and
all electrical connections or procedures may only be performed by a certified
electrician. All electrical work or procedures must comply with local, state, and
national electrical standards and regulations. Except for the power supply, do not
make any other electrical connections with this device.
