14
Trigno Wireless System User’s Guide
TM
Once the software is correctly installed, the PC will automatically
detect the Trigno Base Station when connected to the USB port.
Charging the Sensors
Before using the system, the sensors should be fully charged by
placing them in the Base Station cradle slots. Ensure the Base Sta-
tion is powered and that the green power LED is illuminated.
When charging, the sensor LEDs will illuminate to an amber color.
Once the sensor battery is fully charged the sensor LED will turn
green. A complete charge cycle from a fully depleted sensor takes
approximately 2.5 hours.
Do not force the sensors into the recharging cradles of the Base
Station. The sensors are keyed so that they can only be inserted
in one orientation. Check the sensor orientation and check for
obstructions in the cradle if physical resistance is met while
cradling the sensors.
Recharge only with the approved power supply (SC-P05)
originally included with the system. Charging with any other
power supply may damage the device and will void the
warranty.
Figure 5. Sensor LED feedback for battery charging status.
Charging
Charge
Complete
Summary of Contents for Tringo
Page 2: ......
