35
Specifications
Trigno Sensors
(1)
Range is characterized in open office environments. Interfering RF sources in the 2.4GHz
spectrum, as well as absorptive objects occluding the RF communication path may degrade
transmission distance. Stated range can be exceeded under favorable RF conditions.
(2)
Battery duration is a function of charge and discharge conditions. Optimal battery
performance is obtained when the device is operated at room temperature. Note that the
stated Operation Time reflects the expected performance of a fully charged new battery used
in a sensor that is transmitting data. Operation Time is expected to decrease as a function of
charge cycles, and when the sensor is searching for a network.
(3)
80% of original battery capacity is maintained after 300 discharge/recharge cycles or after 2
years if recharge cycles are less than 300. These values represent typical expectations
under normal conditions. Actual performance will vary depending on usage conditions.
(4)
Operation beyond these temperature limits may damage the rechargeable battery.
GENERAL SPECIFICATIONS
Typical Operating Range
(1)
40 m
RF Frequency Band
2400-2480 MHz (ISM band)
Power Consumption
<65 mW
Case Dimension
27 x 37 x 15 mm
Full-charge Operation Time
(2)
8 hours
Recharge Time
(3)
<2.5 hours
Mass
< 15g
Auto Shut-down timer
300 seconds
Temperature Range
(4)
5 - 50 degrees Celsius
EMG SENSOR SPECIFICATIONS
Range
(1)
11 mV (r.t.i.)
Resolution (EMG Signal)
(2)
168 nV/bit
Bandwidth (EMG Signal)
(3)
20±5 Hz, >40 dB/dec
450±50 Hz, >80 dB/dec
Passband Ripple
(3)
<2%
Overall Channel Noise
(4)
<0.75uV
CMRR
(5)
>80 dB
Sampling Rate
(6)
2000 samples/sec
4000 samples/sec
Number of Contacts
4
Summary of Contents for Tringo
Page 2: ......
