Delphi Display Systems, Inc. RDS-INSFTTCU
Page 81 of 82
Confidential Document:
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Copyright
2012. [Unpublished Work]. All rights reserved
GREET TIME-
The time taken to respond to a car that has arrived at the Menu Board/order point
MAX CARS-
The Timer’s automatic subtraction of a car when the actual number of cars exceeds
the number that has been programmed (using the drive-thru configuration feature)
MULTI-STATION EVENT-
An event that starts and stops an event timer from two or more
detection points; there may be up to four such events
PERIOD-
A user defined block of time used with the Manual Reporting feature.
POWER OFF-
The time at which the unit loses power
POWER ON-
The time at which the unit regains power
PULLOUTS-
The operator’s manual subtraction of a car that has taken more than the allotted time
to reach the next detection point.
REMOVE CAR-
A manual method by which cars are subtracted from the drive-thru
RESET LOOP-
The resetting of a Loop and/or Loop Detector due to the false detection of a car
(phantom car)
RESET MEMORY-
Removes all events stored in memory
CAUTION: DO
NOT
USE THE RESET MEMORY FEATURE WITHOUT FIRST CONTACTING
DELPHI DISPLAY SYSTEMS
CUSTOMER SERVICE OR YOUR LOCAL DEALER
SET PARAMETERS-
User defined settings specific to each store
SHIFTS-
Up to four (4) time periods can be entered into the system to break the day into
segments. Each shift automatically ends at the beginning of the following shift.
SINGLE-STATION EVENT-
An event that starts and stops an event timer from a single detection
point; there may be up to eight such events
TARGET TIMES-
Associated with dayparts, these are used to categorize service times on a grading
scale and can be set for any event in the system
TECH CODE-
Allows full access to the Timer; used to protect features such as RESET MEMORY and
DRIVE-THRU CONFIG.
4W PERIOD-
A block of time of 4 consecutive weeks on which reports are based in lieu of
monthly reporting
