Delphi Display Systems, Inc. RDS-INSFTTCU
Page 28 of 82
Confidential Document:
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Copyright
2012. [Unpublished Work]. All rights reserved
4.7.2 Access Code
This lets you secure your Fast Track
®
Timer from unauthorized access.
You may assign up to four Access Codes, identified as A, B, C, and D.
An unused access code is displayed as “UNUSED” and a used access
code is displayed as “SET”. When no access code has been set, the
default code is “000000”. Once any of the access codes has been set,
however, the default acces
s code “000000” no longer allows access.
Note:
If any or all of the access codes has been changed, you must
change the access code in Site (
See
–
Section 4.2
Site) to match any
access code A
– D with the new change. Otherwise, you will receive an
“invalid access code” when you try to connect to the Fast Track
®
Timer.
4.7.3 Night Mgr
Night Manager allows you to set up a time period to track particular
events over a period of time, as well as identify problems and their
causes (which is particularly useful for absentee management), to view
or print at the Fast Track
®
Timer(printing applies only to 2000 series
timers).
The Fast Track
®
Timer only uses these times in fifteen minute
increments and uses AM and PM. When setting the time for store hours
the software will compensate for times such as 6:22 and will
automatically set that value to 06:15 AM. The program will always move
back
to the closest fifteen-minute interval. You can use either an A or a
P to designate AM or PM. An example would be 6:00p or 18:00 will both
give you 06:00PM. If you set the time for 12:00 this will give you
12:00PM and 00:00 will give you 12:00AM.