L
Fig. 11
H
Fig. 12
Fig. 13
17
REMOVAL OF THE INNER
GLASS DOOR PANEL
The inner glass door panel can easily be
removed for cleaning by unscrewing the
two screws (Figure 10).
During re-assembly, ensure that the inner
glass is correctly aligned and do not over
tighten the screws.
REMOVING THE OVEN DOOR
Please operate as follows:
– Open the door completely.
– Push down the lever “L” and, keeping it in
this position, slowly close the door in order
to lock the hinge (Fig. 11).
– Grip the door (as indicated in fig. 12) and,
while closing it, release the two hinges as
shown in fig. 13.
REASSEMBLING THE OVEN
DOOR
– Grip the door with your hands placed near
the hinges and raise the levers “H” with
your forefingers (fig. 13).
– Insert the hinges in position until the notch
on lever “H” is firmly hooked on the
bottom of the hinge aperture.
– Open the door completely to release levers
“L”.
– If the door is out of line or does not close
properly the hinges are not sitting properly.
Start again from figure 11.
Fig. 10
Summary of Contents for ESM 495 ST
Page 24: ...codice 1101980 8 Rif 1572 8...