that is that the cooking cycle has been superimposed on the clock. In this case,
modify the end of cooking time or the cooking period itself by following again the
above mentioned instructions.
3. Set the temperature and the cooking program by using the function selector and
thermostat knobs of the oven (see specific chapters).
Now the oven is programmed and everything will work automatically, that is the oven
will turn on at the right moment and end the cooking at the selected time.
During cooking, the
symbol remains illuminated.
By pushing the
button you can see the time that remains until the end of cooking.
The cooking program may be cancelled at any time by pushing
.
At the end of the cooking period the oven will turn off automatically, the
symbol
will disappear,
AUTO
will flash and a buzzer will sound, which can be turned off by
pushing any of the buttons, except the
/
buttons.
Turn the function selector and thermostat knobs to zero and put the programmer onto
“manual” by pressing the
button.
Attention:
After a power cut the clock resets to zero and cancels the set programs.
After a power-cut, three zeros will flash on the display.
SETTING THE SEMI-AUTOMATIC OVEN COOKING
This is used to automatically switch off the oven after the desired cooking period has
elapsed.
Set the length of the cooking period by pushing the
button and the
button to
increase, or
to decrease if you have passed the desired time.
AUTO
and the
symbol will be illuminated.
Then set the temperature and the cooking program using the oven function selector
and thermostat knobs (see specific chapters).
The oven is switched on and it will be switched off automatically at the end of the
desired time.
During cooking, the
symbol remains illuminated and by pressing the button
you can see the remaining cooking time.
The cooking program can be cancelled at any time by pushing the
button
.
At the end of the period, the oven and the
symbol will disappear,
AUTO
will flash
and a buzzer will sound; and can be stopped by pushing any of the buttons, except
the / buttons.
Turn the function selector and thermostat knobs to zero and set the programmer onto
“manual” by pressing the
button.
15
Summary of Contents for ESM 495 ST
Page 24: ...codice 1101980 8 Rif 1572 8...
