21
ELECTRICAL REQUIREMENTS
WARNING -THIS APPLIANCE MUST BE EARTHED
•
This appliance must be installed by a qualified electrician and in accordance with the
latest I.E.E. regulations.
•
The appliance must be installed to a suitable double pole switch with a minimum
opening between the contacts of 3mm, and no further than 2 metres from the appli-
ance.
•
The appliance must be connected to the mains supply checking that the voltage cor-
responds to the value given on the rating plate and that the electrical cable's cross
sectional area can withstand the load as specified on the rating plate.
•
The electrical connections must be carried out before the appliance is fitted into the
furniture.
•
The power cable must be of sufficient length to enable it to be connected to the
oven when the oven is placed in front of the housing unit.
•
The mains supply cable must not come into contact with any hot surfaces/parts and
the cable must be positioned so that it does not exceed 75 DEG C at any point.
N.B. For connection to the mains, do not use adapters, reducers or branching
devices as they can cause overheating and burning.
A 30 amp supply is required for connection of this appliance.
Always make sure that the electrical supply is of adequate size.
CAUTION:
•
This appliance must be installed according to these instructions.
Installation
Summary of Contents for ESM 495 ST
Page 24: ...codice 1101980 8 Rif 1572 8...
