Dell XPS Gen 3 Owner'S Manual Download Page 64

Page: 64 / 146

Removing and Installing Parts

www

.dell.com | support.dell.com

Front View (Doors Open)

headphone connector

Use the headphone connector to attach headphones and most kinds of speakers.

microphone connector

Use the microphone connector to attach a personal computer microphone for voice or
musical input into a sound or telephony program.

USB 2.0 connectors (2)

Use the front USB connectors for devices that you connect occasionally, such as joysticks
or cameras.

It is recommended that you use the back USB connectors for devices that typically
remain connected, such as printers and keyboards.

IEEE 1394 connector

Attach high-speed serial multimedia devices, such as digital video cameras.

Summary of Contents for XPS Gen 3



















































































































































Search results

Summary of Contents for XPS Gen 3

Reviews:

Related manuals for XPS Gen 3

Brands by name

Popular brands

Dell XPS Gen 3, Owner'S Manual

Search results

Summary of Contents for XPS Gen 3

Reviews:

Related manuals for XPS Gen 3

Brands by name

Popular brands