Dell XPS Gen 3 Owner'S Manual Download Page 63

Page: 63 / 146

Removing and Installing Parts

Front and Back View of the Computer

Front View

hard-drive activity light

The hard-drive light is on when the computer reads data from or writes data to the
hard drive. The light might also be on when a device such as your CD player is
operating.

power button

Press to turn on the computer.

NOTICE:

To avoid losing data, do not use the power button to turn off the

computer. Instead, perform an operating system shutdown.

drive door

Open the drive door to access the floppy and CD/DVD drives.

front-panel door

Open the door to use the front-panel connectors.

NOTE:

The front door is removable; if you remove it or accidentally knock it off its

hinges, it snaps back in place. For instructions on how to reattach the door, see
page 105.

Summary of Contents for XPS Gen 3



















































































































































Search results

Summary of Contents for XPS Gen 3

Reviews:

Related manuals for XPS Gen 3

Brands by name

Popular brands

Dell XPS Gen 3, Owner'S Manual

Search results

Summary of Contents for XPS Gen 3

Reviews:

Related manuals for XPS Gen 3

Brands by name

Popular brands