Dell XPS Gen 3 Owner'S Manual Download Page 16

Page: 16 / 146

Setting Up and Using Your Computer

www

.dell.com | support.dell.com

Connecting One Monitor With a VGA connector and One Monitor With a DVI Connector

Follow the procedures in "Before You Begin" on page 61.

Connect the VGA connector on the monitor to the VGA (blue) connector on the back of the
computer.

Connect the DVI connector on the other monitor to the DVI (white) connector on the back
of the computer.

Connecting a TV

NOTE:

To connect a TV to your computer, you must purchase an S-video cable, which is available at

most consumer electronics stores. An S-video cable is not included with your computer.

Follow the procedures in "Before You Begin" on page 61.

Connect one end of the S-video cable to the TV-OUT connector on the back of the computer.

Connect the other end of the S-video cable to the S-video input connector on your TV.

Connect the VGA or DVI monitor as described above on page 16.

VGA (blue) connector

DVI (white) connector

optional DVI adapter

TV-OUT connector

Summary of Contents for XPS Gen 3



















































































































































Search results

Summary of Contents for XPS Gen 3

Reviews:

Related manuals for XPS Gen 3

Brands by name

Popular brands

Dell XPS Gen 3, Owner'S Manual

Search results

Summary of Contents for XPS Gen 3

Reviews:

Related manuals for XPS Gen 3

Brands by name

Popular brands