4.
Attach the interface cable to the system board (see
System Board Components
).
5.
Check all cable connections, and fold cables out of the way to avoid blocking the fan and cooling vents.
6.
Replace the CD/DVD drive (see
Installing a CD/DVD Drive
).
7.
Replace the computer cover (see
Replacing the Computer Cover
).
8.
Connect your computer and devices to electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
9.
Enter System Setup (see
Entering System Setup
), and then select the appropriate Drive option.
Media Card Reader
For information about using the Media Card Reader, see your
Owner's Manual
.
Removing a Media Card Reader
1 cable release tab
2 interface cable edge connector
3 interface cable
NOTICE:
To connect a network cable, first plug the cable in to the network port or device, and then plug it in to the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
Summary of Contents for XPS 210
Page 43: ......
