4.
Carefully, lift the drive away from the computer.
5.
Disconnect the floppy drive interface cable from the system board (see
System Board Components
).
Installing a Floppy Drive
1.
Follow the procedures in
Before You Begin
.
2.
Remove the CD/DVD drive, if installed (see
Removing a CD/DVD Drive
).
3.
Gently slide the floppy drive into place until you hear a click or feel the drive securely installed.
1
drive release latch
2
floppy drive
NOTE:
The interface cable is held in place by the metal drive bracket and does not need to be removed from the drive.
1 cable release tab
2 interface cable edge connector
3 interface cable
NOTE:
If the replacement or new floppy drive does not have the shoulder screws, use the screws in the drive panel insert.
Summary of Contents for XPS 210
Page 43: ......
