Replacing the battery-status
light cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Adhere the battery-status light cable to the palm-rest assembly.
2
Route the battery-status light cable and adhere it to the palm-rest
assembly.
3
Slide the battery-status light cable into the battery-status light cable
connector and press down on the latch to secure the cable.
4
Adhere the tape that secures the battery-status light cable to the
keyboard-controls board.
Post-requisites
1
Replace the
battery
.
2
Replace the
base cover
.
38
