Replacing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the base cover with the screw holes on the
palm-rest assembly and snap the base cover into place.
2
Using your fingertips, turn the system badge over.
3
Replace the screws that secure the base cover to the palm-rest assembly.
4
Turn the system badge over and keep it in place.
14
