Replacing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the touch pad with the screw holes on the
palm-rest assembly.
2
Replace the screws that secure the touch pad to the palm-rest assembly.
3
Slide the touch-pad cable into the system board and press down on the
latch to secure the cable.
4
Route the touch-pad cable and adhere the cable to the palm-rest
assembly and keyboard.
Post-requisites
1
Replace the
battery
.
2
Replace the
base cover
.
42
