Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Slide the I/O board under the fan and align the screw holes on the I/O
board with the screw holes on the palm-rest assembly.
2
Align the screw hole on the display cable with the screw hole on the I/O
board.
3
Replace the screws that secure the I/O board to the palm-rest assembly.
4
Slide the I/O-board cable into the I/O board and press down on the latch
to secure the cable.
5
Connect the media-card reader cable to the I/O board.
6
Adhere the tape that secures the display cable to the I/O board.
Post-requisites
1
Replace the
battery
.
2
Replace the
base cover
.
49
