f)
3. To remove the fingerprint reader:
a) Disconnect the fingerprint reader from the connector on the system board [1].
b) Remove the single M2L2.5 screw that secures the hard drive assembly to the computer [2, 3].
c) Lift the fingerprint reader board away from the computer [4].
Installing the fingerprint reader
1. Place the fingerprint reader board into the slot on the computer.
2. Tighten the single M2L2.5 screw that secures the fingerprint reader to the computer.
3. Connect the fingerprint reader cable to the connector on the system board.
4. Install the:
a)
b)
c)
d)
e)
f)
5. Follow the procedures in
After working inside your computer.
Purkaminen ja kokoaminen
23
