Installing the system board
1. Connect the power cable cable.
2. Affix the adhesive tape.
3. Flip the system board.
4. Align the system board with the screw holders on the computer.
5. Tighten the single M2L3 screw to secure the system board to the computer.
6. Connect the following cables to the system board.
a) hard drive connector
b) touchpad connector
c) speaker connector
d) I/O connector
e) eDP connector
f) power connector
g) fingerprint connector
7. Install the:
a)
b)
c)
d)
e)
f)
g)
h)
8. Follow the procedure in
After working inside your computer
.
34
Purkaminen ja kokoaminen
