Option
Description
Strong Password
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE:
If Strong Password is enabled, Admin and System passwords must contain
at least one uppercase character, one lowercase character and be at least 8
characters long.
Password Configuration
Allows you to determine the minimum and maximum length of Administrator and System
passwords.
Password Bypass
Allows you to enable or disable the permission to bypass the System and the Internal HDD
password, when they are set. The options are:
•
Disabled
•
Reboot bypass
Default Setting: Disabled
Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the
admin password is set.
Default Setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Changes
Allows you to determine whether changes to the setup options are allowed when an
Administrator Password is set. If disabled the setup options are locked by the admin password.
UEFI Capsule Firmware Updates
Allows you to controls whether the system allows BIOS update via UEFI capsule update
packages. Default setting: Enable
TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•
TPM On (enabled by default)
•
Clear
•
PPI Bypass for Enabled Commands
•
PPI Bypass for Disabled Commands
•
Attestation Enable (enabled by default)
•
Key Storage Enable (enabled by default)
•
SHA-256 (enabled by default)
•
Disabled
•
Enabled
NOTE:
To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool
(software).
Computrace
Allows you to activate or disable the optional Computrace software The options are:
•
Deactivate
•
Disable
•
Activate
NOTE:
The Activate and Disable options will permanently activate or disable the
feature and no further changes will be allowed.
Default setting: Deactivate
CPU XD Support
Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)
Admin Setup Lockout
Allows you to prevent users from entering Setup when an Administrator password is set.
Default Setting: Enable Admin Setup Lockout is not selected.
Järjestelmän asennusohjelma
67