Installing the hard drive into the hard drive bracket
1. Align the screw holders and insert the hard drive into the hard drive bracket.
2. Tighten the four M3L3 screws to secure the hard drive to the hard drive bracket.
3. Connect the hard drive cable connector to the hard drive.
4. Install the:
a)
b)
c)
d)
e)
5. Follow the procedure in
After working inside your computer
Installing the hard drive assembly
1. Insert the hard drive assembly into the slot on the computer.
2. Tighten the two M2L3 screws to secure the hard drive assembly to the computer.
3. Connect the hard drive cable to the connector on the system board.
4. Install the:
a)
b)
c)
d)
5. Follow the procedures in
After working inside your computer.
Sormenjäljenlukija
Removing the fingerprint reader
1. Follow the procedure in
Before working inside your computer
.
2. Remove the:
a)
b)
c)
d)
e)
22
Purkaminen ja kokoaminen
