5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the display bezel (see
Removing the Display Bezel
).
8.
Remove the M2 x 3-mm screw that secures the camera/microphone assembly.
9.
Lift the camera/microphone out of the top cover and disconnect the camera/microphone cable.
Replacing the Camera and Microphone Assembly
1.
Connect the camera/microphone cable to the connector on the camera/microphone assembly.
2.
Position the camera/microphone in the top cover and replace the M2 x 3- mm screw that secures the camera/microphone assembly to the top cover.
3.
Replace the display bezel (see
Replacing the Display Bezel
).
4.
Replace the display assembly (see
Replacing the Display Assembly
).
5.
Replace the keyboard (see
Replacing the Keyboard
).
6.
Replace the hinge cover (see
Replacing the Hinge Cover
).
7.
Replace the WLAN card (see
Replacing a WLAN Card
).
8.
Replace the hard drive (see
Replacing the Hard Drive
).
Back to Contents Page
1 M2 x 3-mm screw
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE:
This procedure assumes that you have completed the removal procedure first.
Summary of Contents for Vostro 1310
Page 24: ......
