Back to Contents Page
USB Daughter Card
Service Manual
Removing the USB Daughter Card
Replacing the USB Daughter Card
Removing the USB Daughter Card
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the hard drive (see
Removing the Hard Drive
).
3.
Remove the WLAN card (see
Removing a WLAN Card
).
4.
Remove the hinge cover (see
Removing the Hinge Cover
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the palm rest (see
Removing the Palm Rest
).
8.
Remove the M2.5 x 5-mm screw from the daughter card.
9.
Disconnect the daughter card connector from the daughter card.
10.
Remove the daughter card from the computer base.
Replacing the USB Daughter Card
1.
Replace the M2.5 x 5-mm screw to secure the daughter card to the computer base.
2.
Connect the daughter card connector to the daughter card.
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
daughter card connector
2
M2.5 x 5-mm screw
3
USB daughter card
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE:
This procedure assumes that you have completed the removal procedure first.
Summary of Contents for Vostro 1310
Page 24: ......
