1.
Slide the keyboard cable connector into the keyboard connector on the system board.
2.
Rotate the retaining bracket downward to secure the keyboard cable connector.
3.
Hook the tabs along the front edge of the keyboard beneath the front- inside edge of the palm rest.
4.
Press on the upper right edge of the keyboard to snap the keyboard into place.
5.
Replace the two M2 x 3-mm screws at the top of the keyboard.
6.
Replace the hinge cover (see
Replacing the Hinge Cover
).
Back to Contents Page
Summary of Contents for Vostro 1310
Page 24: ......
