Back to Contents Page
Display
Service Manual
Display Assembly
Display Bezel
Display Inverter
Display Panel
Display Cable
Camera and Microphone Assembly
Display Assembly
Removing the Display Assembly
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the hard drive (see
Removing the Hard Drive
).
3.
Remove the WLAN card (see
Removing a WLAN Card
).
4.
Remove the hinge cover (see
Removing the Hinge Cover
).
5.
Remove the keyboard (see
Removing the Keyboard
).
6.
In sequential order, remove the four numbered M2.5 x 5-mm screws from the base of the display assembly.
7.
Remove the captive grounding screw, then disconnect the display cable from the display cable connector on the system board.
8.
Lift the display cable and antenna cables from beneath the tabs on the palm rest.
9.
Lift the display assembly out of the computer.
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTICE:
Ensure that the display cable and the antenna cables do not get caught beneath the plastic tabs on the palm rest.
Summary of Contents for Vostro 1310
Page 24: ......
