manualshive.com logo in svg

Dell Studio 1536, Service Manual, Page: 39 / 41

Share
Download
Dell Studio 1536 Service Manual Download Page 39

Great user manuals database on 

UserManuals.info

Back to Contents Page

  

 

 Speaker Assembly  

Dell™ Studio 1535/1536 Service Manual

 

 

 

 

Removing the Speaker Assembly 

 

 

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the palm rest (see 

Removing the Palm Rest

).  

 

 

  

3.

Remove the four screws (two on each side) on the speakers.  
 

 

  

4.

Release the speaker cable from the securing tabs on the palm rest and take out the speaker assembly.

  

 
 

 

 

Replacing the Speaker Assembly 

 

 

 

 

1.

Replace and tighten the four screws securing the speaker assembly to the palm rest.  
 

 

  

2.

Route the speaker cables carefully through the securing tabs on the palm rest.  
 

 

  

3.

Replace the palm rest (see 

Replacing the Palm Rest

).  

 

Back to Contents Page

 

 

 

 

CAUTION: 

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

1  screws (4)  2  speaker cable 

 

CAUTION: 

Before you begin the following procedure, follow the safety instructions that shipped with your computer.

Summary of Contents for Studio 1536










































Reviews:

No comments